R-60 / Fine reclaimed rubber
Fine-strained reclaimed rubber with low contamination for seals, hoses and light-colored rubber products.
MATERIAL / Actual Photos
Fine straining delivers low contamination and a smooth surface. Suitable for seals, hoses, light-colored products and molded parts with demanding surface requirements. Begin with laboratory trials to confirm cure rate and surface quality before scaling up.
| Item | Unit | Typical Value | Test Standard / Source |
|---|---|---|---|
| Tensile strength | MPa | ≥ 11.0 | GB/T 528 |
| Elongation at break | % | ≥ 380 | GB/T 528 |
| Mooney viscosity ML(1+4) 100°C | MU | 60 ±5 | GB/T 1232.1 |
| Ash content | % | ≤ 8.0 | GB/T 4498 |
Typical values are for selection reference. Batch COA or the agreed assembly specification shall prevail.
Compare published records in the same product line. Key parameters support initial selection.
| Product | Key Parameters | PN | Application | Action |
|---|---|---|---|---|
| High-Performance Reclaimed Rubber R-80 | ≥ 14.5 MPa · 55 ±5 MU | R-80 / High-tear reclaimed rubber | Made from all-steel tire tread compound with stable Mooney viscosity and high tear resistance for tire sidewalls, base tread and industrial damping parts. |
Need a TDS, MSDS or compliance document?
Open Download CenterTell us your current formulation, target substitution ratio, and testing standards. We will attach the test report for the corresponding batch and then arrange the samples.